"The continuous fence panels I ordered are well made and economical for fencing along the front of my pasture. The guys responded quickly to my calls and were even able to custom make a couple of gates and panels to fit my space. Turn around was quick and delivery to Tucson was reasonably priced. After a day digging and setting the posts, it took three of us one day to install about 12 panels and two double gates. It’s a great system!" -Melissa H.
Continuous fence is designed to be an affordable, easy way to install yet durable product for horses and livestock. Its a great product for all you “(D)o (I)t (Y)ourselvers” out there. It can be used for arenas, pens, stalls, perimeter fencing, pastures and much more! Each panel is made of 1 1/4 inch 14 gauge round pipe. They are 20 ft long and 4 ft high. They are designed to be placed on any wood or metal post 1 ft off the ground making a 5 ft high fence. They come in 4 and 5 rail panels. Each panel has a male end allowing the panels to slide into each other making a continuous fence. NO WELDING NECESSARY. Simply purchase our continuous fence with our clips and screws. Attach one to your post. Slide the next panel in and repeat for as long as you need. Its as easy as that!
Check out our how to videos
Products needed For installation:
- Continuous Fence Panel
- Continuous Fence Clips (if you arent welding)
- Screws (Lags or self tapping)
20 Ft long by 48 Inches High. Made up of Four 14 guage 1 1/4 Inch tubing. Each panel has four 1 inch flat straps welded to secure the rails together with each rail having its own slip joint piece attached for easy installation.
Our continuous fence is 20 Ft long by 48 Inches High. Made up of Five 14 guage 1 1/4 Inch tubing. Each panel has four 1 inch flat straps welded to secure the rails together with each rail having its own slip joint piece attached for easy installation. Great for DIY fencing.
Our 8 Ft Posts are 2 3/8 diameter and are 14 gauge.
These clips are made for our 1 1/4 inch Continuous fence panels. They simply slip over the pipe and make it easy to attach the panels to a solid metal post either using self drill screws or welding. Recommended 1 per rail at each post.
These screws make installing continuous fence panels simple. Simply put the clip over the panel and use these self tapping screws to attach the clip to the posts holding the panel in place.
1 1/4 Continuous Fence Clips with 3/8 hole made for the lags to go through and connect to wood posts.
Wood Lags used to secure a continuous fence panel using clamps to a wood post.
2 3/8 Round plastic post caps to make a nice finished look for your fence
Galvanized Post cap made to fit 2 3/8 posts. Great way to finish off your fence to make it look sharp!